+91 9825 632377 email@example.com
Model "VS113" series are high temperature lab oven with air re-circulation. The blower is positioned above the top baffle wall of working chamber and is mounted on a motorised shaft. The shaft and blower is driven by a motor through a "V" belt drive and is supported on heavy duty pedestal bearing. This mechanism protects the motor from heat, makes it durable and runs smoothly.
Specially designed tubular air heaters are fit on either sides of working chamber. Its terminals are extended out side the oven body for better durability. The blower sucks in air from the top of the chamber and blows to the bottom of the chamber through the heater zone, re-circulating air and creating uniform temperature through out the chamber. Used for pre heating, drying, sterilizing, baking, aging, etc.
|Temperature Range :||5°C above ambient to 400°C|
|Temp. Accuracy :||± 0.5°C|
|Temp Uniformity :||± 1°C|
|Supply :||415V.A.C, 50 Hz|
|Heating Control :|| Auto tuned temperature microcontroller|
with PID algorithm
|Heating Element :|| Tubular air heater fit on either sides of|
|Air Flow :|| Forced air re-circulation by means of|
|Motor :||1/4 HP 3 Phase.|
|Interior :|| Made of mild steel with heat resistant |
aluminium paint or Stainless steel with
|Exterior :|| Made of thick gauge mild steel sheet,|
finished with epoxy powder coating.
|Insulation :||Fibre glass wool|
|Models||Wattage (KW)||Internal dim. H.W.D (cm)||External dim. H.W.D (cm)||Shelves No.s|
|VS 113 A||2.50||35 x 35 x 35||105 x 96 x 74||2|
|VS 113 B||3.00||45 x 45 x 45||115 x 106 x 84||3|
|VS 113 C||4.00||60 x 45 x 45||130 x 106 x 84||4|
|VS 113 D||5.00||60 x 60 x 60||130 x 121 x 100||4|
Tune your Thermostatic equipment when there is
a considerable change
in working load or set temperature.
It increases efficiency
and saves power.